INTRODUCTION

INSTALLATION & TROUBLESHOOTING

MENU CONFIGURATION

CMH8OUT

ASSOCIATIONS

MENU

PARAMETRI

OVERVIEW

There are shown the datas related to interface firmware and the status on analogic inputs and outputs of the board (Outputs open/closed, Inputs 0=standby, 1=alarm, 2=tamper)

NETWORK CONFIGURATION

IP ADDRESS : IP of the CMH9000ABSOLUTE board

GATEWAY: Network Gateway Address

SUBNET MASK : 255.255.255.0 (tipically)

MODE CONFIGURATION

MODE : Standalone

BARRIERS ON COM1 : select 1/8 in base of the addreses of the IMN200RS present on the RS485

SERIAL OUTPUTS MODULES : select 1/30 in base of the addreses of the CMH8OUT on the RS485 connected to COM0.

N.B : la speed boudrate chosen for CMH8OUT MUST be always the same!

GETAS SERVER : IP address of the machine hosting GEVISOFT, in case of interaction with GEUTEBRUCK

OFFSET : offset to assign to the board where there are more than one interface communicating with Geutebruck system.

OUTPUT CONFIGURATION

Insert in the field related to the desired parameter (described in the table of the browser) the code of the output on CMH9000ABSOLUTE/CMH8OUT. In the window scrolling menu there are present the connected barriers (selected in mode configuration); Before to change the barrier SAVE the parameters of the actual one, to not lose inserted datas.

· 1…...4                    4 outputs on CMH9000ABSOLUTE

· 1011…1018           8 outputs module CMH8OUT with address 1

· 1021…1028           8 outputs module CMH8OUT with address 2

· 1301..1308         8 outputs module CMH8OUT with address 30

COM0 SETUP

SPEED : 9600bps (or different, in base of what is set on CMH8OUT modules)

DATABIT : 8

PARITY : none

STOP BITS : 1

COM1 SETUP

SPEED : 19200bps

DATABIT : 9

PARITY : none

STOP BITS : 1

PASSWORD CHANGE

ACTUAL PASSWORD : actual password, to confirm the change

NEW PASSWORD : new password for browser protection

RETYPE PASSWORD : confirmation new password