|
At the entering into CMH9000DAVE webbrowser (to enter insert as address the default value 192.168.1.222) will be asked entering username and password DEFAULT USERNAME : Admin DEFAULT PASSWORD : Sicurit |
|
MENU CONFIGURATION |
|
MENU |
PARAMETRI |
|
OVERVIEW |
There are shown the datas related to interface firmware and the status on analogic inputs and outputs of the board (Outputs open/closed, Inputs 0=standby, 1=alarm, 2=tamper) |
|
NETWORK CONFIGURATION |
IP ADDRESS : IP of the CMH9000DAVE board GATEWAY: Network Gateway Address SUBNET MASK : 255.255.255.0 (tipically)
|
|
MODE CONFIGURATION |
MODE : Masterdave BARRIERS ON COM1 : select 1/8 in base of the addreses of the MESDAVE200RS present on the RS485 SERIAL OUTPUTS MODULES : select 1/30 in base of the addreses of the CMH8OUT on the RS485 connected to COM0. N.B : speed boudrate chosen for CMH8OUT MUST be always the same!
|
|
OUTPUT CONFIGURATION |
Insert in the field related to the desired parameter (described in the table of the browser) the code of the output on CMH9000DAVE/CMH8OUT. In the window scrolling menu there are present the connected microwaves (selected in mode configuration); Before to change the barrier SAVE the parameters of the actual one, to not lose inserted datas. · 1…...4 4 outputs on CMH9000DAVE · 11…18 8 outputs module CMH8OUT with address 1 · 21…28 8 outputs module CMH8OUT with address 2 · 301..308 8 outputs module CMH8OUT with address 30 |
|
COM0 SETUP |
SPEED : 9600bps (or different, in base of what is set on CMH8OUT modules) DATABIT : 8 PARITY : none STOP BITS : 1 |
|
COM1 SETUP |
SPEED : 4800bps DATABIT : 9 PARITY : none STOP BITS : 1 |
|
PASSWORD CHANGE |
ACTUAL PASSWORD : actual password, to confirm the change NEW PASSWORD : new password for browser protection RETYPE PASSWORD : confirmation new password |