|
COMPONENTS |
|
|
A Peridect System is composed by 5 main elements : |
|
FENCEN |
Peridect Analisys unit. Could be in light version (up to 56 detectors, not supporting CMH9000PER), LightRS (up to 56 sensors, interfacing with CMH9000PER) and complete (supporting of CMH9000PER and up to 246 detectors). The unit communicates with sensors through a dedicated bus and is equipped with : 1) 10 O.C outputs (that could be expanded to 16) 2) 8 double-balanced inputs(2.2kOhm balance) |
|
FENSEN10 |
Fence detectors, equipped with a digital microprocessor and connected through a dedicated bus (that also supply them)There are different models of FENSEN10, that change in base of the sensitivity (3 levels) and of the detector shape (standard, anti-vandal, hidden). Each detector have more or less a detection area of 3,5m x 2,5m (related to the kind of fence), and communicate with FENCEN twice per second. |
|
FENSEN30 |
Underground detectors, equipped with a digital microprocessor and connected through a dedicated bus (that also supply them)Completely sealed (IP77), build with an anti-rodent cable. Each sensore, according to it’s sensitivity, have a medium detection range of 1,5mt, according to the nature of the terrain where is grounded. It communicates with FENCEN twice per second. |
|
FENSEN15 |
Input/Output Module (1/1) on bus (only fence version), può essere utilizzato per comandare o ricevere dati da apparecchiature esterne (es barriere analogiche, telecamere, contatti) e farle diventare parte del sistema, oppure come espansioni delle uscite della FENCEN |
|
FENSENPP |
First level surge protector, that is put on the bus to prevent damages to sensors/analisys unit derivated from overvoltages from outside. Tipically is suggested one surge protector every 100 sensors. |